What are the actual benefits of ANOLIT compared to all the other disinfectants?

It is effective against bacteria, including pathogens of tuberculosis and highly dangerous infections, viruses, pathogenic fungi. It is effective against microorganism spores, including anthrax spores. Not all disinfectants have such a broad spectrum: some are ineffective against bacteria that cause tuberculosis, some are ineffective against viruses.

Our product has a unique chemical composition, it can only be produced through electrochemical synthesis using specialized equipment, it cannot be produced using any other method. The complex blend of active forms of chlorine and oxygen enables Anolit to have a strong antimicrobial effect. Microorganisms cannot adapt to it and develop resistance.

Anolit completely decomposes into fresh water after use, does not require rinsing and decontamination after use, does not accumulate in the environment, does not create a film on surfaces.

Anolit has the lowest hazard class according to GOST 12.1.007-76 - Class 4 of low-hazard substances, if ingested, applied on one's skin or inhaled. Many alternative products belong to Class 3 of moderately hazardous substances, if ingested.

Anolit does not contain additional components (surfactants, fragrances, dyes, etc.), therefore does not cause allergic reactions and skin irritation when in contact with one's skin and if inhaled (fewer "chemicals");

The concentration of active substances in the solution is 0.05 + 0.005%, this is a ready-to-use solution, it does not need to be diluted to certain values.

The solution of the same concentration is used to treat different kinds of objects in different manner, only processing time depends on the type of infection. Usually, disinfectants are produced in the form of concentrates, they must be diluted to a certain concentration, depending on the object and the type of infection. For example, standard solutions of Abacteril are prepared by diluting the concentrate to 0.01% - 6.0% for disinfection of various objects. This requires staff time, precision when the product is diluted and care. The processing time also depends on the concentration of any given standard solution, each concentration requires its own time. All the above is inconvenient.

Anolit belongs to the group of non-explosive and non-flammable substances, no toxic substances are emitted when it is used or stored.

Anolit can be applied by dipping, wiping, irrigation, spraying. This is not possible for all the alternative products, some cannot be sprayed or used as an aerosol.

What makes ANOLIT ANK SUPER different from the sodium hypochlorite?

How can you quickly measure the content of active chlorine in Anolit?

For effective and quick assessment of the concentration of active agents in a solution, one can use an express analysis of concentration of active chlorine and active oxygen compounds in equivalent to active chlorine. For this purpose one can use test strips designed for neutral anolyte:
test strips DESIKONT-NA-01 (NPF VINAR according to TU 9398-038-11764404-2003);
chemical indicator strips for express control of concentrations of standard solutions of the disinfectant "Neutral Anolyte" (LLC "Delta chem-tech" according to TU 2642-013-66948373-2010),
test strips AQUACHECK, Water Quality Test Strips for High-Range Chlorine (HACH, USA).
The analysis is carried out in accordance with the instructions for use of any given test strips. When immersed in anolyte, the strip changes color depending on the concentration of active chlorine.

Is ANOLIT ANK SUPER approved for use? Are there clear instructions and recommendations for using ANOLIT ANK SUPER in a particular field?

Disinfectant ANOLIT ANK SUPER manufactured by Delfin Aqua LLC is duly registered in the Russian Federation:
State Registration Certificate issued by the Federal Service for Protection of Consumer Rights and Human Welfare No. RU.77.99.88.002.E.000777.03.21 dated 11.03.2021,
Declaration of Compliance ROSS RU D-RU.PA01.B.74396 / 21 dated 09.04.2021,
Instruction Manuals:
Instruction Manual No. DA 003-13 for the disinfectant ANOLIT ANK SUPER produced by STEL-ANK-SUPER, intended for disinfection of equipment and premises at all and any enterprises producing wine, beer, soft drinks and mineral water. Approved by FBUZ "Central Research Institute of Epidemiology of Rospotrebnadzor". 2013; 11 p.
INSTRUCTION MANUAL No. DA 004-13 for the disinfectant ANOLIT ANK SUPER produced by STEL-ANK-SUPER, intended for disinfection at dairy industry enterprises. Approved by FBUZ "Central Research Institute of Epidemiology of Rospotrebnadzor". 2013; 12 p.
Instruction Manual No. DA 005-13 for the disinfectant ANOLIT ANK SUPER produced by Delfin Aqua LLC to be used for disinfection and sterilization. MOSCOW. Approved by FBUZ "Central Research Institute of Epidemiology of Rospotrebnadzor". 2013; 19 p.
Instruction Manual No. DA 006-14 for the disinfectant ANOLIT ANK SUPER produced by Delfin Aqua LLC to be used for pre-sterilization cleaning of medical products. MOSCOW. Approved by the State Unitary Enterprise "Moscow City Disinfection Center". 2014; 12 p.

Does Anolit cause skin irritation on personnel during disinfection?

ANOLIT ANK SUPER belongs to the lowest hazard class (according to GOST 12.1.007-76 - Class 4 of low-hazard substances), if ingested, applied on one's skin or inhaled;
does not have a local irritating effect on one's skin, does not cause allergies, does not accumulate in the skin, does not contain fragrances, dyes and other components, can be used to treat objects by wiping with people present, safe for service personnel even with prolonged contact, belongs to the group of non-flammable and non-explosive substances

What will happen if Anolit gets in one's eyes or is accidentally ingested?

If it is ingested, one should drink a glass of water with 5-10 crushed activated carbon tablets; no stomach pumping. Seek medical attention if necessary.
In case of contact with eyes, rinse them under running water for several minutes. In case of irritation of mucous membranes, it is necessary to drip a 30-percent solution of sodium sulfacil into one's eyes.

What kind of water is fed into the machine (from where)?

The quality characteristics of water fed into the machine are regulated by SanPiN 2.1.4.1074-01. "Drinking water. Hygienic requirements regarding water quality of centralized drinking water supply systems. Quality control":
hydrogen potential (pH) - 5.0-6.5
total mineralization - no more than 0.2 g / l
hardness - no more than 0.5 mg-eq / l
total iron content - no more than 0.1 mg / l
Constant flow of water through the machine must not be interrupted and be at least 100 + 10 l / h
When the machine is in service, in order to avoid failure it is prohibited to:
use water with mechanical impurities in the electrochemical unit;
switch on the electrochemical unit unless the water temperature at the entry is 4 ° C or higher and 30 ° C or lower;
store and transport the electrochemical unit with residual water at a temperature of 0 ° C and lower;
allow water and other liquids to get in the control unit and electrical components of the machine.

Refined salt be used in the machine?

To prepare a standard solution, one should use evaporated food salt (extra) GOST R 51574 or salt pellets for regeneration of cation-exchange materials TU 9192-001-55898695-01.
One should use tap water for household and drinking purposes without mechanical impurities to dissolve salt.
To prepare a better quality solution, it is advisable to use specially prepared demineralized or distilled water.
The preparation of a salt solution is detailed in the STEL-ANK-SUPER Operation Manual.

Should Anolit be diluted with water? Do I need to prepare solutions with different concentrations?

ANOLIT ANK SUPER is a ready-to-use solution. In healthcare facilities, it is used without being diluted, one concentration fits all, for disinfection of any surfaces and objects. At the same time, some Instructions Manuals say that standard solutions of ANOLIT ANK SUPER can be prepared by diluting it with purified and softened

Does the clothing change color when exposed to Anolit?

Like any other product with active chlorine compounds, Anolit can leave light spots on colored fabrics. It is preferable to use light-colored clothing or a protective apron while working with Anolit.

How should I store Anolit?

ANOLIT ANK SUPER should be stored in canisters or other containers made of acid-alkali-resistant polymer materials resistant to strong oxidants or in glass containers sealed with rubber or plastic stoppers, protected from direct sunlight, at temperatures from + 3 ° C to + 25 C, do not freeze or heat up.
If properly stored in a glass, plastic or enameled container with a tightly closed lid, ANOLIT ANK SUPER retains disinfecting properties for up to 6 months.

What are the requirements regarding the premises where the STEL-ANK-SUPER will operate?

An isolated room, in which the machine and equipment for water treatment can be accommodated, is recommended for the STEL-ANK-SUPER. The room must be equipped with a water tap, a drain to the sewage system, a 220 V or 380 V socket with grounding, supply and exhaust ventilation.

What is the difference between STEL-ANK-SUPER and all the other electrolysis equipment?

The STEL-ANK-SUPER machine enables you to produce ANOLIT ANK SUPER, where the content of ballast ions of sodium chloride is significantly lower than the concentration of active substances (oxidants) or is zero (0.09% with concentration of active agents at 0.05%), in contrast to alternative products from other manufacturers, where mineralization varies in the range of 1-5 g / l with the same concentration. The equipment is fully automated; it does not require supervision of highly qualified technical personnel for daily operation. Automated operation means that the machine chooses the required dosage of salt solution for the synthesis of Anolit according to specified parameters, maintains the level of the finished product in the storage tank. The automated system gives prompt alerts if the electrochemical reactor needs to be flushed.

How do you perform warranty maintenance?

The warranty period of STEL-ANK-SUPER is 12 months from the date of its sale. The manufacturer guarantees uninterrupted operation of the equipment, provided the requirements regarding transportation, storage and installation, as well as requirements regarding operation and maintenance specified in the Operation Manual have been fulfilled. Warranty repairs and maintenance can be performed directly on site by the manufacturer's qualified personnel.